|
|
 |
|
|
Thread Tools | Display Modes |
Sep 13th, 2005, 3:46 AM
|
#1 |
|
Programmer
Join Date: Sep 2005
Posts: 58
Rep Power: 3
 |
New Switch, FTP Problems
Ok, in the past I have had alot of problems with my router, so i ditched it. Now I got this Linksys switch, and when I go start --> run --> cmd and type ipconfig it says my ip address is 192.168.2.10 which is the address of the modem.
The FTP Server, naturally, reconizes me as 192.168.2.10 aka the modem, therefore no one outside of my lan can connect to me. My question is how do I fix this. I'm pretty new to networking, but this is what I have plugged in to the switch: Port 1 = Modem Port 2 = Desktop PC 1 Port 3 = Desktop PC 2 Port 4 = PS2 Port 5 = Xbox The entire network is wired, nothing is wireless. Any ideas? I am using BulletProof FTP and has worked with no problems in the past. I also have Cerebus and Gene6 if I need to switch. Thanks for the help! |
|
|
|
Sep 13th, 2005, 4:15 AM
|
#2 |
|
Professional Programmer
Join Date: Apr 2005
Location: Nowhere Special
Posts: 466
Rep Power: 4
 |
The FTP client should recognize the computer it's on as the local network address. If you're talking about moving files from one computer to another, you need to have an FTP daemon on the serving computer, unless BulletProof is also one.
__________________
% rc4 hexkey < input > output
#define S ,t=s[i],s[i]=s[j],s[j]=t /* rc4 hexkey <file */
unsigned char k[256],s[256],i,j,t;main(c,v,e)char**v;{++v;while(++i)s[
i]=i;for(c=0;*(*v)++;k[c++]=e)sscanf((*v)++-1,"%2x",&e);while(j+=s[i]
+k[i%c]S,++i);for(j=0;c=~getchar();putchar(~c^s[t+=s[i]]))j+=s[++i]S;} |
|
|
|
|
Sep 13th, 2005, 4:27 AM
|
#3 |
|
Programmer
Join Date: Sep 2005
Posts: 58
Rep Power: 3
|
Ok, I tried RaidenFTPD and I still cant. The switch isnt giving me the external ip address. But why? Instead it is reconizing me as the modem, 192.168.2.10
|
|
|
|
|
Sep 13th, 2005, 7:06 AM
|
#4 |
|
Professional Programmer
Join Date: Dec 2004
Location: Worcester, MA
Posts: 441
Rep Power: 4
   |
you'll have to go into your 'switch' (i assume router, since switches can't communicate between a LAN and a WAN) and forward all incoming traffic to port 21 to your FTP box, 192.168.2.10. go to http://192.168.2.1 and look around there.
|
|
|
|
|
Sep 13th, 2005, 7:29 AM
|
#5 |
|
Resident Grouch
 
Join Date: Jun 2005
Posts: 6,453
Rep Power: 10
|
Both my Linksys' are 192.168.1.1, you might wanna check your docs.
__________________
Abstraction doesn't make it impossible to write bad code; it makes it possible to write superior code. Contributor's Corner: Grumpy on C++ Exceptions DaWei on Pointers |
|
|
|
|
Sep 13th, 2005, 7:38 AM
|
#6 |
|
Programming Guru
Join Date: Jul 2004
Location: United States
Posts: 3,466
Rep Power: 8
|
I had an issue with this before... I had to enable IP Passthrough on my DSL modem (Westell).
__________________
http://jasonpowers.net "There are a thousand hacking at the branches of evil to one who is striking at the root." |
|
|
|
|
Sep 13th, 2005, 1:44 PM
|
#7 |
|
Professional Programmer
Join Date: May 2005
Location: Detroit
Posts: 254
Rep Power: 4
|
Uhm, you should have a router somewhere. A switch can't route the signals anywhere without one. (unless your modem has a router in it, which is possible)
It should be modem --> router --> switch --> Pc, xbox, etc Then go into your router and set up port forwarding (aka virtual servers) |
|
|
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
